ANDHRA LOYOLA INSTITUTE OF ENGINEERING AND TECHNOLOGY, VIJAYAWADA-500028
	COURSE OUTCOMES
	ECE: R13
	CO2	To make the learner rediscover India as a land of knowledge
	CO3	To discuss how scientific point of view seeks to arrive at the truth without being biased by emotion
	CO4	To inform the learner how to write clearly and logically
	CO5	To inform the learner that all men are in paril
	CO6	To inform the learner about the book “ THE MISTERIOUS UNIVERSE”
	C112	SUBJECT: MATHEMATICS-I
	CO1	Student’s gain knowledge on solving differential equations and its applications in Engineering and other real world phenomena.
	CO2	The Laplace Transforms play an important role in solving many problems in Engineering and other real world phenomena.
	CO3	Student’s gain knowledge on Laplace Transforms for solving initial value problems.
	CO4	Students gain the knowledge on Taylors series problems and applications on maxima minima. identify, formulate & solving engineering problems.
	CO5	Help student’s to apply this knowledge to solve partial differential equations.
	CO6	Students gain the knowledge on solving Higher order partial differential equations in engineering. And its applications in Engineering.
	C113	SUBJECT: Mathematical methods
	CO1	Student’s gain knowledge on solving Algebraic and Transcendental equations and its applications in Engineering and other real world phenomena.
	CO2	The Students gain knowledge in interpolation which play an important role in Engineering problems and other real world phenomena.
	CO3	Student’s are able to solve the differential equations numerically in engineering problems involving differential equations.
	CO4	Students gain the knowledge on Function of complex variables and can Identify Cauchy Riemann Equations formulate &harmonic; solve engineering problems.
	CO5	Help students to apply this knowledge in Cauchy Integral Formulae, Taylors and Laurent’s series .
	CO6	Students gain the knowledge on solving Cauchy residue theorem in engineering. And its applications in Engineering problems involving unit circle, semi circle.
	C114	SUBJECT: ENGINEERING PHYSICS
	CO1	Designing an instrument and enhancing the resolution for its operation would be effect as achieved through study of applicational aspects of physical Optics”
	CO2	While lasers are trusted Non-linear coherent sources establishing for the fitness of instrumentation, establishing a structure property relationship for materials requires allotment of an equivalent footing in convening the physics knowledge base.
	CO3	The Electrical or Electronic gadgets are designed basing on the response of naturally abundant and artificially made materials, while their response to E- or H- fields controls their performance.
	CO4	The utility and nuances of ever pervading SHM and its consequences would be the first hand-on to as it clearly conveyed through the detailed studies of Acoustics of Buildings, while vectorial concepts of EM fields paves the student to gear – up for a deeper understanding.
	CO5	The discrepancy between classical estimates and laboratory observations of physical properties exhibited by materials would be lifted out through the understanding quantum picture of sub-atomic world dominated by electron and its presence.
	CO6	In the wake of ever increasing demand for the space and power the watch word “small is beautiful”, understanding the physics of electronic transport as underlying mechanism for appliances would provide a knowledge base.
	C115	SUBJECT: PROFESSIONAL ETHICS AND HUMAN VALUES
	CO1	Student gain knowledge on human values and different related aspects
	CO2	Student learns about engineering ethics and its importance
	CO3	Student gain knowledge on comparative study of engineering and experimentation
	CO4	Sudent understand the importance of safety and its role in engineering profession
	CO5	Studentlearns te rights and keep of an engineer.
	C116	SUBJECT: ENGINEERING DRAWING
	CO1	Student’s gain the knowledge About how to draw polygons, curves like ellipse by using oblong method and arcs of circle method, scales - diagonal, vernier scale
	CO2	Student’s gain knowledge orthographic projection- first angle projection, third angle projections- points , Straight line parallel to both the planes, perpendicular to one plane and parallel to another plane, inclined one plane parallel to another.
	CO3	Student’s gain the knowledge to draw the projections of straight line when it is inclined to both the planes, angle of inclination and traces.
	CO4	Student’s gain the knowledge to draw about planes (polygons) parallel to one plane, perpendicular to one plane and parallel to another plane and inclined to one and both the planes
	CO5	Student’s gain the knowledge about the solids like prisms, pyramids, cone and cylinder inclined to one plane and parallel to another plane.
	CO6	Student’s gain the knowledge about how to convert 2D to 3D and 3D to 2D
	C117	SUBJECT: ENGLISH –COMMUNICATION SKILLS LAB -1
	CO1	To enable the students to learn through practice the communication skills of listening, speaking, reading and writing.
	CO2	Making Inqueries on the phone, thanking and responding to Thanks Practice work.
	CO3	Responding to Requests and asking for Directions Practice work.
	CO4	Asking for Clarifications, Inviting, Expressing Sympathy, Congratulating
	CO5	Apologising, Advising, Suggesting, Agreeing and Disagreeing Practice work.
	CO6	Stress and Intonation Practice work.
	C118	SUBJECT: ENGINEERING PHYSICS LAB
	CO1	Able to learn Determination of wavelength of a source-Diffraction Grating-Normal incidence. Newton’s rings – Radius of Curvature of Plano - Convex Lens.Determination of thickness of a spacer using wedge flim and parallel interference fringes. Determination of Rigidity modulus of a material- Torsional Pendulum. Determination of Acceleration due to Gravity and Radius of Gyration-
	CO2	Able to practice Melde’s experiment – Transverse and Longitudinal modes. Verification of laws of vibrations in stretched strings – Sonometer. Determination of velocity of sound – Volume Resonator. L- C- R Series Resonance Circuit. Study of I/V Characteristics of Semiconductor diode.
	CO3	Students shound understand I/V characteristics of Zener diode. Characteristics of Thermistor – Temperature Coefficients. Magnetic field along the axis of a current carrying coil – Stewart and Gee’s apparatus. Energy Band gap of a Semiconductor p - n junction. Hall Effect in semiconductors. Time constant of CR circuit. Determination of wavelength of laser source using diffraction
	CO4	Determination of Young’s modulus by method of single cantilever oscillations. Determination of lattice constant – lattice dimensions kit. Determination of Planck’s constant using photocell. Determination of surface tension of liquid by capillary rise method.
	CO5	Hall Effect Crystal Structure Hysteresis Brewster’s angle Magnetic Levitation / SQUID Numerical Aperture of Optical fiber Photoelectric Effect Simple Harmonic Motion Damped Harmonic Motion
	CO6	LASER – Beam Divergence and Spot size B-H curve ,Michelson’s interferometer ,Black body radiation
	C119	SUBJECT: ENGINEERING WORKSHOP AND IT WORKSHOP
	CO1	To impart hands-on practice on basic engineering trades and skills. Note: At least two exercises to be done from each trade.
	CO2	T-Lap Joint ,Cross Lap Joint ,Dovetail Joint, Mortise and Tennon Joint Fitting ,Vee Fit Square , Half Round , Dovetail Fit Black Smithy,Round rod to Square S-Hook ,,Round Rod to Flat Ring , Round Rod to Square headed bolt
	CO3	Parallel / Series Connection of three bulbs , Stair Case wiring , Florescent Lamp Fitting , Measurement of Earth Resistance Tin Smithy , Taper Tray , Square Box without lid Open Scoop , Funnel
	CO4	Enabling the student to understand basic hardware and software tools through practical exposure
	CO5	Different ways of hooking the PC on to the internet from home and workplace and effectively usage of the internet, web browsers, email, newsgroups and discussion forums .Awareness of cyber hygiene( protecting the personal computer from getting infected with the viruses), worms and other cyber attacks .
	CO6	Crafting professional word documents; excel spread sheets, power point presentations and personal web sites using the Microsoft suite of office tools
	C121	SUBJECT: ENGLISH-II
	CO1	To make the learner understand how modern life has been shaped by technology
	CO2	To make the learner understand how the unequal heating of earth’s surface by the sun, an atmospheric circulation pattern is developed and maintain
	CO3	To introduce the technologies of the 20th century and 21st centuries to the learners
	CO4	To inform the learner various advantages and charectistics of water
	CO5	In this lesion swami Vivekananda highlights the importance of work for any development
	CO6	In this lesson abdul kalam highlights the advantage of work
	C122	SUBJECT: MATHEMATICS-III
	CO1	Able to know the concepts of linear system of equations
	CO2	Able to know the concepts of eigen values, eigen vectors and quadratic forms
	CO3	Able to know the concepts of multiple integrals
	CO4	Able to know the concepts of special functions such as beta ,gama functions and their applications
	CO5	Able to know the concepts of vector differentiation
	CO6	Able to know the concepts of vector integration
	C123	SUBJECT: ENGINEERING CHEMISTRY
	CO1	Able to know how to purify drinking water, industrial applications, sea water purification methods.
	CO2	Able to know about different batteries how they are working, chemistry, different types of ion selective electrodes and their working.
	CO3	Able to know about reason for corrosion and how to control corrosion by different methods.
	CO4	Come to know about different types of plastics manufacture and applications, paints and their constituents.
	CO5	Able to know about different types of solid, liquid, gaseous fuels and their origin, extraction, applications.
	CO6	Able to know about advanced materials like nano, liquid crystals, conducting polymers, PV-Cells, cement and green chemistry methods.
	C124	SUBJECT: ENGINEERING MECHANICS
	CO1	Able to know the concepts of force and friction, direction and its application
	CO2	Able to know the application of free body diagrams , solution to problems using graphical methods and law of triangle of forces
	CO3	Able to know the concepts of centre of gravity
	CO4	Able to know the concepts of moment of inertia and polar moment of inertia including transfer methods and their applications
	CO5	Able to know the motion in straight line and in curvilinear paths, its velocity and acceleration computation and methods of representing plane motion
	CO6	Able to know the concepts of work, energy and particle motion
	C125	SUBJECT: COMPUTER PROGRAMMING
	CO1	Able to know the concepts of operation of CPU algorithm and computational procedure, executing programs in LINUX
	CO2	Able to know the concepts of branching, iteration and data representation using arrays
	CO3	Able to know the concepts of modular programming and recursive solution formulation
	CO4	Able to know the concepts of pointers and dynamic memory allocation
	CO5	Able to know the miscellaneous aspects of C
	CO6	Able to know the concepts of file operations
	C126	SUBJECT: NETWORK ANALYSIS
	CO1	Solving network by using mesh and nodal analysis.
	CO2	Getting the information about analysis of AC NETWORKS.
	CO3	About coupled circuits and resonance in series and parallel circuits.
	CO4	Solving complicated networks using network theorems.
	CO5	Student gain’s knowledge about network parameters.
	CO6	Getting the information about transient analysis of the system.
	C127	SUBJECT: ENGINEERING CHEMISTRY LAB
	CO1	The students entering into the professional course have practically very little exposure to lab classes.
	CO2	Able to know The experiments introduce volumetric analysis; redox titrations with different indicators;
	CO3	Able to know the EDTA titrations; then they are exposed to a few instrumental methods of chemical analysis.
	CO4	Able to know the concepts of Thus at the end of the lab course, the student is exposed to different methods of chemical analysis
	CO5	Able to know the use of some commonly employed instruments
	CO6	Able to know the They thus acquire some experimental skills.
	C128	SUBJECT: ENGLISH – COMMUNICATION SKILLS LAB2
	CO1	The student will learn how body language is used in communication and interpret non-verbal symbols
	CO2	The learner will understand how to start a conversation and learn useful functions related to different situations like Telephone Etiquette, giving directions etc
	CO3	The student will be able to present information with confidence, clarity and conviction, and be able present well.
	CO4	The student will learn how to participate in Group Discussion effectively, expressing ideas by using appropriate language in GD
	CO5	The learner become aware of various types of interviews and be able to participate in interviews confidently.
	CO6	The student will learn to argue for or against something and be able to participate in debates
	C129	SUBJECT: COMPUTER PROGRAMMING LAB
	CO1	Acquire knowledge about the basic concept of writing a program.
	CO2	Understand the basic concept of C Programming, and its different modules that includes conditional and looping expressions, Arrays, Strings, Functions, Pointers, Structures and File programming
	CO3	Role of constants, variables, identifiers, operators, type conversion and other building blocks of C Language.
	CO4	Role of Functions involving the idea of modularity & Concept of Array and pointers dealing with memory management.
	CO5	Structures and unions through which derived data types can be formed
	CO6	File Handling for permanent storage of data or record.
	C211	SUBJECT: MEFA
	CO1	Student’s gain knowledge how to know the customer needs taste and preference and determine the demand.
	CO2	Student’s gain knowledge how the changes in demand occur and how to satisfy them by using statistical methods for demand forecasting.
	CO3	Student’s gain knowledge of combination of factors of production for maximum level of output.
	CO4	Students gains knowledge in types of markets and how the pricing is link with the nature of market.
	CO5	Student’s gain knowledge about how to start & select the nature of their business, & gain knowledge of how to accept the project proposals.
	CO6	Students gain the knowledge of how to make profit analysis with the help of financial statements and make decisions based on liquidity positions.
	C212	SUBJECT: ELECTRONIC DEVICES AND CIRCUITS
	CO1	Able to know about the semi conductor physics
	CO2	Able to know about the Junction diode characteristics and special diodes
	CO3	Able to know about the different types of rectifiers and filters
	CO4	Able to know about the transistor characteristics (BJT & FET)
	CO5	Able to know about the biasing of transistor and stabilization factors
	CO6	Able to know about the small signal analysis of BJT and FET
	C213	SUBJECT: DATA STRUCTURES
	CO1	Able to know the algorithm complexities, recursive algorithms and sorting techniques
	CO2	Able to know about stack and queue techniques for logical operations
	CO3	Able to know about various operations of linked lists
	CO4	Able to know the implementation of trees in various forms
	CO5	Able to know the advanced concepts of trees
	CO6	Able to know the orientation on graphs, representation of graphs, graph traversals and spanning trees
	C214	SUBJECT: ENVIRONMENTAL STUDIES
	CO1	The natural resources and their importance in life and recognize the need to conserve the natural resources
	CO2	The concept of the eco system and its function in the environment
	CO3	The bio-diversity of India and the threats to bio-diversity and conservation practices to protect the bio-diversity.
	CO4	Various attributes of the pollution and their impacts and measures to reduce pollution
	CO5	Social issues both rural and urban environment and the possible means to combat the challenges
	CO6	The environmental legislations of India and the first global initiatives to words sustainable development
	C215	SUBJECT: SIGNALS AND SYSTEMS
	CO1	Student able to know signal analysis & fourier series
	CO2	Student able to know Fourier transforms & sampling
	CO3	Student able to know signal transmission through linear systems
	CO4	Student able to know convolution and correlation of signals
	CO5	Student able to know Laplace transforms
	CO6	Student able to know Z–TRANSFORMS
	C216	SUBJECT: ELECTRICAL TECHNOLOGY
	CO1	Able to learn the principle of electromechanical energy conversion of Single excited and multi excited machines.
	CO2	Student is able to understand the principle of operation, constructional details and operational characteristics of DC generators
	CO3	Students gain the knowledge about. Principle and characteristics of DC motors. starting and speed control methods of DC motors
	CO4	Students gain information about the principle of operation and constructional details of transformers. Develop the equivalent circuit and evaluate the performance of transformers.
	CO5	Able to learn the principle of operation and constructional details of three phase induction motor. Study the torque – slip characteristics and starting methods of induction motor.
	CO6	Able to learn the principle of operation and constructional different single phase and special machines
	C217	SUBJECT: ELECTONIC DEVICES AND CIRCUITS LAB
	CO1	Able to learn P-N Junction Diode Characteristics & Zener Diode Characteristics
	CO2	Able to learn Rectifiers (without and with c-filter) & BJT Characteristics(CE Configuration
	CO3	Able to learn FET Characteristics(CS Configuration) & SCR Characteristics
	CO4	Able to learn UJT Characteristics & Transistor Biasing
	CO5	Able to learn CRO Operation and its Measurements
	CO6	Able to learn Emitter Follower-CC Amplifier & FET-CS Amplifier
	C218	SUBJECT: NETWORKS AND ELECTRICAL TECHNOLOGY LAB
	CO1	Solving network by using mesh and nodal analysis.
	CO2	Getting the information about analysis of AC NETWORKS.
	CO3	About coupled circuits and resonance in series and parallel circuits.
	CO4	Solving complicated networks using network theorems.
	CO5	Student gain’s knowledge about network parameters.
	CO6	Getting the information about transient analysis of the system.
	C221	SUBJECT: ELECTRONIC CIRCUIT ANALYSIS
	CO1	Learn the represention of Transistor at high frequencies, Hybrid- ? common emitter transistor model, Hybrid ? conductances, Hybrid ? capacitances, validity of hybrid ? model, determination of high-frequency parameters in terms of lowfrequency
	CO2	Learn about : Classification of amplifiers, methods of coupling,cascaded transistor amplifier and its analysis, analysis of two stage RC coupled amplifier, high input resistance transistor amplifier circuits and their analysis-Darlington pair amplifier, Cascode amplifier, Boot-strap emitter follower, Analysis of multi stage amplifiers using FET, Differential amplifier
	CO3	Learn the Design of different types of feedback amplifiers and their characteristics
	CO4	Learn about different oscillators and their design
	CO5	Learn the Classification of power amplifiers ,heat sinks and their applications
	CO6	Learn the , Q-Factor, small signal tuned amplifier,capacitance single tuned amplifier, double tuned amplifiers, effect of cascading single tuned amplifiers on band width, effect of cascading double tuned amplifiers
	C222	SUBJECT: MANAGEMENT SCIENCE
	CO1	Student’s gain knowledge about Organisation and management and the basic fundamentals of management.
	CO2	Student’s gain knowledge on Operations management and project management.
	CO3	Student’s gain knowledge in different functions of management.
	CO4	Students gains knowledge in strategic management and strategical issues of management.
	CO5	Student’s gain knowledge about ethics in business and communication process in business.
	CO6	Students gain the knowledge on different contemporary issues of management.
	C223	SUBJECT: RANDOM VARIABLES AND STOCHASTIC PROCESS
	CO1	The student learns about the different Distribution and Density functions of Binomial and Poisson Random Variables
	CO2	The student learns about how to apply the Expectation Operations on Different Random Variables including moments about Origin and Central moments
	CO3	The student learns about the different Distribution and Density functions of Vector Random Variables and Multiple Random Variables
	CO4	The student learns about the different Random processes including stationary and ergodic processes.
	CO5	The student learns about the Auto Spectrum Density and Power spectrum density
	CO6	The student learns to design linear system without effecting noise.
	C224	SUBJECT: SWITCHING THEORY AND LOGIC DESIGN
	CO1	The student will be able to identify the various Numbering systems suitable for representing the information.The student will be able to Minimize the boolean expressions using Boolean algebra & theorems. Will be able to detect & correct single errors using Parity & Hamming codes.
	CO2	The student will be able to simplify logical expressions upto 6 varaiables using K map and can write a program for more variables by using the concepts of the Tabulation method.
	CO3	The student will be able to design adder and subtactor circuits in different numbering systems like binary, BCD, Hexadecimal & Excess 3. The student will be able to design Decoders, Demultiplexers, encoders and multiplexers.Use the above circuits for implementing Boolean Expressions.
	CO4	The student will be able to choose PROM, PLA or PAL for implementing Boolean Expressions.
	CO5	The student will be able to design sequential circuits like Synchronous/ A Synchronous counters , sequence detectors and registers using flip flops like RS ,D, T and JK.
	CO6	The student will know the capabilities and limitations of Finite state machine and will be able to minimize Finite state machine and convert Melay to Moore machine and Vice versa.
	C225	SUBJECT: EM WAVES AND TRANSMISSION LINES
	CO1	Able to know about basic concepts of electrostatics and magneto statics
	CO2	Able to know the concepts of Maxwell’s equations for time varying fields
	CO3	Able to know the characteristics of EM waves such as conduction ,polarization and wave propagation in conductors and dielectric materials
	CO4	Able to know the characteristics of EM waves such as reflection and refraction along with pointing theorem
	CO5	Able to know the basic parameters of transmission lines
	CO6	Able to know characteristics of transmission lines and impedance matching
	C226	SUBJECT: ANALOG COMMUNICATIONS
	CO1	Student’s gain knowledge how to design major building blocks of communication systems and to understand analysis of amplitude modulation and demodulation in time & Frequency domain.
	CO2	Student’s gain knowledge about analysis of DSB-SC and SSB-SC modulation and demodulation techniques.
	CO3	Student’s gain knowledge about various techniques for angle modulation and demodulation.
	CO4	Student’s gains knowledge in types of noises and noise performance of analog modulation techniques.
	CO5	Student’s gain knowledge about various blocks in Transmitters and Receivers.
	CO6	Student’s gain the knowledge about various pulse modulation techniques and to understand frequency & Time division Multiplexing techniques.
	C227	SUBJECT: ELECTRONIC CIRCUIT ANALYSIS LAB
	CO1	Students able to know Determination of fT of a given transistor & Voltage-Series Feedback Amplifier
	CO2	Students able to know Current-Shunt Feedback Amplifier & RC Phase Shift/Wien Bridge Oscillator
	CO3	Students able to know Hartley/Colpitt’s Oscillator & Two Stage RC Coupled Amplifier
	CO4	Students able to know Darlington Pair Amplifier & Bootstrapped Emitter Follower
	CO5	Students able to know Class A Series-fed Power Amplifier & Transformer-coupled Class A Power Amplifier
	CO6	Students able to know Class B Push-Pull Power Amplifier & Single Tuned Voltage Amplifier
	C228	SUBJECT: ANALOG COMMUNICATIONS LAB
	CO1	Student’s gain knowledge about how to perform demodulation of amplitude modulated signal using simple diode detector.
	CO2	Student’s gain knowledge about how to generate and demodulate DSB-SC signal.
	CO3	Student’s gain knowledge about how to reconstruct original message signal from sampled signal.
	CO4	Student's gains knowledge about the functioning of Pre-emphasis and De-emphasis circuits.
	CO5	Student’s gain knowledge about the characteristics of phase locked loop.
	CO6	Students gain the knowledge about the generation and demodulation of pulse amplitude modulated wave.
	C311	Pulse and Digital Circuits
	CO1	The students are able to identify that sinusoidal signal will preserves its shape when we passed it through RC networks, but other signals cannot. And they will able to use the RC low pass circuit as an integrator and RC high pass circuit as a differentiator.
	CO2	The students are able to design clipper and clamper circuits which require to design rectifier circuits, and in so many designs to reduce the noise we will use clampers
	CO3	The students will understand how the digital IC is designed by using different logic’s like DTL,TTL, ECL,CMOS.And they will understand the switching applications of diode and transistor.
	CO4	The students able to design automatic systems which require switch and multivibrators. Example for automatic systems is security alarms, water level indicator, and automatic street light control.
	CO5	The students are able to generate sawtooth waveform using different time base generators, which require in many applications like CRO and TV Display.
	CO6	The students able to understand the synchronization, and they are able to do synchronize two signals using different relaxation circuits. student is able to design sampling gate based applications like analog to digital and digital to analog converters
	C312	LINEAR IC APPLICATIONS
	CO1	Learning AC,DC analysis of differential amplifier, properties of differential amp, types, different stages of diff amplifiers
	CO2	Learning Application specific integrated circuits, & ranges, types block diagram of ic741 and characteristics
	CO3	Learning linear & non linear applications- integrator, differentiator, comparator, rectifiers and etc..
	CO4	Learning design of filters and filter orders, types. Multipliers ,modulators & sample and hold amplifiers
	CO5	Learning Types 555 timer, and modes of timer, PLL- concepts and applications and VCO.
	CO6	Learning Fundamental of ADC&DAC types and examples, specifications
	C313	Control systems
	CO1	To learn the mathematical modeling of physical systems and to use block diagram algebra and signal flow graph to determine overall transfer function
	CO2	To analyze the time response of first and second order systems and improvement of performance by proportional plus derivative and proportional plus integral controllers
	CO3	To investigate the stability of closed loop systems using Routh’s stability criterion and the analysis by root locus method.
	CO4	To present the Frequency Response approaches for the analysis of linear time invariant (LTI) systems using Bode plots, polar plots and Nyquist stability criterion
	CO5	Able to design Lag, Lead, Lag-Lead compensators to improve system performance from Bode diagrams
	CO6	Ability to represent physical systems as state models and determine the response. Understanding the concepts of controllability and observability.
	C314	Digital System Design & Digital IC Applications
	CO1	Able to know how to write a code & How to test method to run logic.
	CO2	Able to know what happen after writing a code & assigning it to analog Part.
	CO3	Based on the logic able to choose the type of PLD and able to know the design and operate with various memory blocks
	CO4	Design and analysis of Logic gate by using CMOS and able to select a Particular Logic Family
	CO5	Able to know the Integrated circuits for all digital operational designs like adder, sub tractor, multipliers, multiplexer, encoders, decoders
	CO6	Able to know the Integrated circuits for all digital operational designs like registers, counters, flip flops, and memory elements
	C315	Antennas and Wave Propagation
	CO1	Students will be able to identify basic antenna parameters.
	CO2	Students gain the knowledge of how todesign and analyse wire antennas, loop antennas, reflector antennas, lens antennas, horn antennas and microstrip antennas
	CO3	Students gain the knowledge of how to quantify the fields radiated by various types of antennas.
	CO4	Students gain the knowledge of how todesign and analyse antenna arrays
	CO5	Students gain the knowledge of how toanalyse antenna measurements to assess antenna’s performance
	CO6	Students will be able to identify the characteristics of radio wave propagation
	C316	Pulse and Digital Circuits LAB
	CO1	The studentsare able to identify that sinusoidal signal will preserves its shape when we passed it through RC networks,but other signals cannot. And they will able to use the RC low pass circuit as an integrator and RC high pass circuit as a differentiator.
	CO2	The students are able to design clipper and clamper circuits which require to design rectifier circuits, and in so many designs to reduce the noise we will use clampers.
	CO3	The students will understand how the digital IC is designed by using different logic’s like DTL,TTL,ECL,CMOS.And they will understand the switching applications of diode and transistor.
	CO4	The students able to design automatic systems which require switch and multivibrators. Example for automatic systems is security alarms, water level indicator, and automatic street light control.
	CO5	The students are able to generate sawtooth waveform using different time base generators, which require in many applications like CRO and TV Display.
	CO6	The students able to understand the synchronization, and they are able to do synchronize two signals using different relaxation circuits. And student is able to design sampling gate based applications like analog to digital and digital to analog converters.
	C317	IC Applications Laboratory
	CO1	Students will have a thorough understanding of operational amplifier (741)
	CO2	Students will be able to design circuits using operational amplifiers for various applications.
	CO3	Students will be able to design basic timer circuits using IC555.
	CO4	Students will be able to design voltage regulator circuits using IC723, 7805,
	CO5	Students will be able to design voltage regulator circuits using IC723, 7805, 7809,7905,79012.
	CO6	will be able to design various applications of PLL (IC 565)and VCO (IC 566).
	C318	Digital System Design & Digital IC Applications Laboratory
	CO1	Able to choose the appropriate Gate based on the requirement of logic
	CO2	Able to organize the memory array.
	CO3	Able to find out truth outputs.
	CO4	Able to design & develop the circuits based on memory elements
	CO5	Able to retrieve & perform operations on data
	CO6	Able to perform arithmetic & Logical operations
	C319	Intellectual Property Rights & Patents
	CO1	Student’s gain knowledge about Intellectual property rights and its types.
	CO2	Student’s gain knowledge regarding copy rights and its subject matters, and its rights.
	CO3	Student’s gain knowledge about patents and infringements and transfer of patent rights.
	CO4	Student’s acquires knowledge regarding Trademarks, its registration process and its claims.
	CO5	Student’s gain knowledge about Trade secrets, breach of contract and confidentiality in maintaining trade secret
	CO6	Students gain knowledge about cyber law, cyber crimes and e- commerce
	C321	Microprocessors and Microcontrollers
	CO1	Students gain knowledge about Architecture, Instruction set, Addressing modes of 8086.
	CO2	Students gain knowledge how to develop programs for different Addressing modes.
	CO3	Students gain knowledge about how to perform 8086 Interfacing with different peripherals &implement programs.
	CO4	Students gains knowledge about learn the concepts of Advanced micro processors.
	CO5	Students gain knowledge about how to develop programs for simple applications by using 8051.
	CO6	Students gain the knowledge about advanced microcontrollers & its applications.
	C322	DIGITAL SIGNAL PROCESSING
	CO1	After going through this course the student will be able to verify the type of digital signal processing systems.
	CO2	After going through this course the student will be able to estimate the spectra of signals that are to be processed by a discrete time filter, and to verify the performance of a variety of modern and classical spectrum estimation techniques.
	CO3	After going through this course the student will be able to design and simulate a digital filter
	CO4	After going through this course the student will be able to design new digital signal processing systems
	CO5	After going through this course the student will be able to design and realize FIR, IIR filters
	CO6	After going through this course the student will be able to program a DSP processor to filter signals
	C323	Digital Communications
	CO1	Able to understand and analyze the performance of Digital Communication System and various Pulse Digital Modulation Systems.
	CO2	Able to design a Digital Communication System and analyze various Digital Modulation techniques along with its applications.
	CO3	Able to analyze various Digital Modulation systems in terms of probability of error
	CO4	Able to understand the need of information theory in communication system.
	CO5	Able to understand the need of coding theory in communication system
	CO6	Able to analyze linear block and convolution codes and its need for error correcting and detecting that occur during transmission of Data.
	C324	Microwave Engineering
	CO1	Students gain knowledge of Microwave Transmission Lines
	CO2	Students gain knowledge of waveguide structures and how they are used as elements in impedance matching and filter circuits
	CO3	Students will Apply analysis methods to determine circuit properties of passive or active microwave devices.
	CO4	Students gain the knowledge and understand microwave analysis methodsof micro wave O Type Tubes
	CO5	Students will be able to distinguish between M-type and O-type tubes
	CO6	Students gain the knowledge of Microwave solid state devices and how to analyse and measure various microwave parameters using a Microwave test bench
	C325	BIOMEDICAL ENGINEERING
	CO1	Physiological systems of the body, Man Instrument system, problems encountered in measuring a living system. Sources of bio potentials.
	CO2	Electrode theory, Types of electrodes, Transducers used in biomedical engineering.
	CO3	Structure and physiology of heart ,Cardiac cycle, Heart sounds, ECG, Abnormalities in ECG, Measurement of BP, Blood flow ,Volume and cardiac output ,Physiology of respiratory system, Measurements in Respiratory system, Respiratory therapy equipment
	CO4	Elements of ICU , organization of a hospital , Patient monitoring displays, Diagnosis ,calibration and repair of Patient monitoring equipment, Pace makers & Defibrillators, structure & physiology of Ear & Eye. Diagnosis of ear & eye. Prosthetic Devices like hearing aids, Myo electric arm, Biomaterials. Therapeutic process like diathermy, stimulators , Laparoscopy , Clinical laboratory instruments
	CO5	Diagnostic techniques like Ultra scan, X-ray, CAT scan, MRI & ECT. Bio -telemetry principles and implantable units.
	CO6	Monitors & recorders used in Biomedical Instruments. Physiological effects of Electrical current .Shock hazards and methods of prevention .
	C326	Microprocessors and Microcontrollers LAB
	CO1	Student gains the knowledge about Programming of 8086
	CO2	Student gains the knowledge about Programming through MASAM for Arithmetic & Logical operations
	CO3	Student gains the knowledge about Programming through MASAM for Strings, DOS & BIOS
	CO4	Student gains the knowledge about Programming through microprocessor kit for 8086
	CO5	Student gains the knowledge about Microcontroller Timing programs
	CO6	Student gains the knowledge about Programming through Keil C microcontroller
	C327	Digital Communication Laboratory
	CO1	Able to know about the Time Division Multiplexing technique used in Digital transmission
	CO2	Able to understand the working of various Pulse Digital Modulation Systems like PCM,DPCM,DM.
	CO3	Able to understand various Digital Modulation Techniques like FSK, PSK, DPSK
	CO4	Able to know about signal processing technique used in digital system to improve signal to noise ratio at reduced bit rates.
	CO5	Able to analyze source coding techniques.
	CO6	Able to analyze various error correcting and detecting techniques.
	C328	DIGITAL SIGNAL PROCESSING LAB
	CO1	Student gains the knowledge about the architecture of DSP chips – TMS 320C 5X/6X Instructions and linear convolution
	CO2	Student gains the knowledge about circular convolution and FIR filter using windowing technique
	CO3	Student gains the knowledge about IIR filter on DSP processors and N-Point FFT algorithm
	CO4	Student gains the knowledge about MATLAB program to generate sum of sinusoidal signals
	CO5	Student gains the knowledge about implement MATLAB program to find frequency response of analog LP/HP filters.
	CO6	Student gains the knowledge about compute power density spectrum of a sequence and FFT of 1-D signal.
	C411	SUBJECT NAME: OPTICAL COMMUNICATION
	CO1	The students are able to construct different types modes of fibers and historical developments of optical communications
	CO2	The Students are able to know classification of fiber materials and fiber losses
	CO3	The Students are able to analyze the dispersion techniques ,types of connector
	CO4	The Students are able to know splicing and know the operation of optical sources.
	CO5	The Students are able to analyze simple Source to fiber power launching and to analyze simple optical system design, power budget with examples
	CO6	The Students are able to know the functioning of optical detectors and receivers and to study the basic concepts of WDM and techniques for measurement of attenuation dispersion
	C412	SUBJECT NAME: VLSI DESIGN
	CO1	The students are able to understand the concepts of various IC technologies
	CO2	The Students are able to know about MOS & BI CMOS circuit design processes
	CO3	The Students are able to analyze basic circuit concepts and scaling of MOS circuit
	CO4	The Students are able to know about the sub system design
	CO5	The Students are able to analyze the VLSI design issues
	CO6	The Students are able to know the FPGA design
	C413	SUBJECT NAME: DIGITAL IMAGE PROCESSING
	CO1	a) The student learned about basics of digital image processing b) The student learned about how to acquire image using components.c) The student learned about different transformation techniques used for image processing in order to reduce processing time.
	CO2	The student learned about techniques used for improving the quality of image in spatial domain
	CO3	The student learned about techniques used for improving the quality of image in frequency domain.
	CO4	a) Student learned about different types of noises which occur in images b) Student learned about different types of restoration techniques to reduce noise in an image.
	CO5	Student learned about how to apply gray scale image processing techniques to color imagesand about transformations which can give time and frequency information in frequency domain. b) Student learned about basic image compression techniques.
	CO6	The Student learned about different techniques used to identify the subpart of images using morphological image processing and about different types of segmentation techniques.
	C414	SUBJECT NAME: RADAR SYSTEMS
	CO1	The student are able to familiarize the key concepts of the RADAR
	CO2	The student are able to familiarize the performance factors of the RADAR
	CO3	The student are able to distinguish between stationary and moving targets by Doppler principle and understand clearly about CW and FMCW radar
	CO4	The student are able to understand about working of MTI RADAR and Pulse RADAR
	CO5	The student are able to understand about various Tracking RADAR and able to understand various RADAR antennas and its parameters
	CO6	The student are able to understand the need of signal detection techniques in radar in presence of noise and to understand different Types of displays ,duplexer and Phased array antennas
	C415	SUBJECT NAME: COMPUTER ARCHITECTURE AND ORGANISATION
	CO1	The student are able to basic structure of computers and computer arithmetic
	CO2	The student are able to know about register transfer language , micro operations and central processing unit
	CO3	The student are able to understand about micro program control
	CO4	The student are able to understand about the memory system
	CO5	The student are able to understand various input & output organization
	CO6	The student are able to understand about pipe line and vector processing
	C416	SUBJECT NAME: COMPUTER NETWORKS
	CO1	students will be able to enumerate the layers of OSI and TCP/IP models and to identify the different types of network topologies and protocols.
	CO2	students will able to identify the different types of network devices and able to explain about transmission media
	CO3	students will able to classify the routing algorithms and to illustrate dynamic routing algorithms.
	CO4	Students will be able to discuss about cryptography and network security and to explain connection management
	CO5	Students will able to categorize the services like dialogue control ,synchronization and translation
	CO6	Students will able to know about mail services.
	C417	SUBJECT NAME: MICROWAVE& OPTICAL COMMUNICATION LAB
	CO1	Student gains the knowledge about Gunn diode operation
	CO2	Student gains the knowledge about the Microwave measurements
	CO3	Student gains the knowledge about the light gathering power
	CO4	Student gains the knowledge about the light source characteristics
	CO5	Student gains the knowledge about the basic optical losses
	CO6	Student gains the knowledge about the Intensity modulation of light source
	C418	SUBJECT NAME: VLSI LAB
	CO1	Student gains the knowledge implementation of an inverter and universal gates
	CO2	Student gains the knowledge about design of full adder and full subtractor
	CO3	Student gains the knowledge about design and implementation of RS-latch AND D-latch
	CO4	Student gains the knowledge about designing of asynchronous counter
	CO5	Student gains the knowledge about static RAM cell
	CO6	Student gains the knowledge about differential amplifier and ring oscillator
	C421	SUBJECT NAME:CELLULAR AND MOBILE COMMUNICATION
	CO1	The students are able to familiarize the key concepts of the CMC field
	CO2	The students are able to familiarize the key concepts of the CMC field
	CO3	The students are able to know the techniques to reduce the Interference
	CO4	The students are able to know the Point-to-Point model and Estimation
	CO5	The students are able to detect the type of antenna suited for the required communication level and to know the frequency channel Assignment
	CO6	The students are able understand the concept of handoff and able to able understand the GSM, CDMA
	C422	SUBJECT NAME: EMBEDDED SYSTEM
	CO1	The Students are able to learn ES Vs GPCS, History of ES, Classification of ES, Appl., Purpose, Core, Memory, Sensors, Actuators, Com Interface
	CO2	The Students are able to learn application Specific ES Example, Domain Specific ES Example- Automotive
	CO3	The Students are able to learnI/O Types and Examples, Serial and Parallel Devices, Wireless Devices, WDT, RTC, OrCAD, PCB Design
	CO4	The Students are able to learnDesign Approaches, ALP, Embedded C, Interrupt Sources, IHM, Multiple Interrupts, DMA, C vs Embedded C and also types of OS, Tasks/Processes and Threads, Multi-Processing and Multi-Threading, Device Drivers, Choosing RTOS
	CO5	The Students are able to learnFundamental Issues, Computational Models, H/W and S/W Trade-off, Integration of H/W and Firmware, able to learnIDE, Dis-Assembler, Decompiler, Simulators, Emulators, Target H/W Debugging, Boundary Scan
	CO6	The Students are able to learnthe Main S/W Utility tool, Pre-processors, Interpreters, Compiler, Linker, Testing on Host, Simulators, Lab Tools
	C423	SUBJECT NAME:WIRELESS SENSOR NETWORK
	CO1	Students gain knowledge on introductory concepts on Wireless sensors
	CO2	Students gain knowledge on Sensor node architecture and its operating systems.
	CO3	Students gain knowledge of network topologies and different PAN topologies like MANET, WANET
	CO4	Studentsgains knowledge of the concepts of MAC Protocols for wireless sensor network and about various routing protocols and their working in wireless sensor networks
	CO5	Students gain the knowledge of Transport layer and security protocols for WSN and about Infrastructure establishment of WSN and Security issues in WSN.
	CO6	Students gain the knowledge about sensor network platforms and tools, Applications of WSN.
	C424	SUBJECT NAME:ELECTRONIC MEASUREMENT AND INSTRUMENTATION
	CO1	The student will know the performance and characteristics of instrument
	CO2	The student will know about signal generator and oscillator
	CO3	The student will know the about various oscilloscopes
	CO4	The student will know the design of various bridges
	CO5	The student will know concepts of various transducers
	CO6	The student will know about measurement of various physical parameters